Muratec F-110 Field Engineering Manual page 25

Disassembly and Reassembly
3-26 Solenoid
1. Before you remove the solenoid, you should remove:
– All covers (see page 3-3, 3-9)
2. Unplug one connector from the engine board and
remove one screw, then remove the solenoid.
3-27 HVPS board
1. Before you remove the HVPS board, you should
remove:
– All covers (see page 3-3, 3-9)
2. Remove three screws and one connector from the
HVPS board, then remove the board.
3-16
Note : when reassembling, make sure that the terminal
is five.