Muratec F-110 Field Engineering Manual page 21

Disassembly and Reassembly
3-19 Pick-up roller ass'y
1. Before you remove the pick-up roller ass'y, you
should remove:
– All covers (see page 3-3, 3-9)
– LSU (see page 3-10)
2. Unplug all the connectors from the engine board.
3. Remove four screws securing the plate upper and
remove the plate upper as below.
3-12
4. Remove two screws and remove the roller from the
plate.
Note : When you reassemble the pick-up roller, make
sure that the right end of the pick-up roller fits into
the pick-up gear shaft.
Pick-up gear shaft