Muratec F-110 Field Engineering Manual page 24

3-24 Fan
1. Before you remove the fan, you should remove:
– All covers (see page 3-0)
– Motor ass'y (see page 3-15)
2. Unplug one connector from the engine board and
remove the fan.
3-25 Gear pick-up ass'y
1. Before you remove the gear pick-up ass'y, you
should remove:
– All covers (see page 3-3, 3-9)
Note: When reassembling, make sure that the direction
of the gear is correct.
2. Release two snap-fits and remove the gear pick-up
ass'y from the main frame.
Disassembly and Reassembly
3-15