Muratec F-110 Field Engineering Manual page 17

Disassembly and Reassembly
3-11 ADF roller
1. Before you remove the ADF roller, you should
remove:
– OPE cover (see page 3-3)
2. Remove two screws securing the guide paper and
remove the guide paper.
3-12 CIS
1. Remove one screw and push CIS as shown below
and lift it.
3-8
Guide Paper
3. Remove ADF roller from the scan front frame.
2. Separate the Dummy CIS from CIS.
CIS
ADF Roller
tape