Muratec F-110 Field Engineering Manual page 26

3-28 Hook board
1. Before you remove the hook board, you should
remove:
– All covers (see page 3-3, 3-9)
2. Unplug one connector from the main board and
remove two screws, then remove the hook board from
the main frame.
3-29 Fuser ass'y
1. Before you remove the fuser ass'y, you should
remove:
– All covers (see page 3-3, 3-9)
2. Remove two wires after remove two screws from the
main frame and one connector from the inter connec-
tor.
3. Remove two screws and unlatch the fuser ass'y using
a proper tool.
Disassembly and Reassembly
3-17