Disassembly and Reassembly
3-41 Roller Feeder
1. Before you remove the actuator empty/feeder, you
should remove:
– All covers (see page 3-0)
– Motor ass'y (see page 3-15)
2. Release two snap-fits and remove the gear-feed,
clutch-feed, and the spring-clutch.
Spring-clutch
3-24
Gear-feed
Clutch-feed
3. Rotate the pick-up bushing as shown below and
remove holder feeder ass'y and roller feeder.
4. Separate the Roller Feeder from the Holder Feeder
Ass'y.
Roller Feed
Holder Feed