Canon FAX-L290 User Manual page 68

If you selected REGULAR TX in step 15:
16
Press Set.
17
Press Stop to return to standby mode.
If you selected PSWD/SUBADDRESS in step 15:
The other party's fax machine may require an ITU-T standard subaddress and/or
password to receive faxes. The subaddress/password you register here must match
exactly the one(s) registered on the other party's fax machine. Contact the other party
to check their settings.
When sending with a subaddress/password, the other party's fax machine receives the
fax only if your subaddress/password matches theirs. Their fax machine then handles
the received fax according to the feature they are using.
You also need to register a subaddress/password when polling a fax machine that
requires these settings (1 p. 9-10).
Continue with the steps below to register a subaddress/password:
16
Press Set twice.
17
If a subaddress is required, use the
numeric buttons to enter it.
• If a subaddress is not required, ignore
this step.
• If you have already registered a
subaddress that you want to keep,
ignore this step.
18
Press Set twice.
19
If a password is required, use the
numeric buttons to enter it.
• If a password is not required, ignore this
step.
• If you have already registered a
password that you want to keep, ignore
this step.
6-6
Speed Dialling
Ex:
05=
Ex:
15:00 FaxOnly
SUBADDRESS
Ex:
Ex:
PASSWORD
Ex:
Ex:
1234
4321
Chapter 6