Printing A Document Set For Delayed Sending - Canon FAX-L290 User Manual

Printing a Document Set for Delayed Sending

Follow this procedure to print a document stored in memory for delayed sending:
n
When you print a document stored in memory for delayed sending using the following
procedure, the print is reduced to 90% of the original.
1
Open the one-touch speed dial panel.
2
Press Delayed Transmission.
Use ∂ or ¨ to select PRINT.
3
4
Press Set.
5 Use ∂ or ¨ to select the transaction
number (TX/RX NO.) of the
document you want to print.
• If you are unsure of the transaction
number (TX/RX NO.), print the DOC.
MEMORY LIST (1 p. 9-5).
• A "#" before the transaction number
(TX/RX NO.) indicates that that
document is being sent at that moment
and can therefore not be selected.
• Use ¬ or ® to display details of the
transaction (e.g. destination).
6
Press Set.
Press T to print the first page only, or
7
press # to print all pages of the
document.
• The FAX prints the document.
8
To continue printing other documents
set for delayed sending, repeat the
procedure from step 5.
-or-
Press Stop to return to standby mode.
7-16
Sending Faxes
REGISTER
PRINT
Ex:
TX/RX NO.
Ex:
TX/RX NO. #0003
1ST PG ONLY?
YES=(A) NO=(#)
Ex:
15:00 FaxOnly
0001
Chapter 7