Tx (Transmission) Settings Menu - Canon FAX-L290 User Manual

TX (Transmission) SETTINGS Menu

For details on accessing the settings below, see p. 14-3.
The selectable settings and the default settings vary depending on the country where you
have purchased the FAX. The values shown here are average values.
For the default settings for your FAX, see Appendix B.
Setting
ECM TX
MID PAUSE SET
AUTO REDIAL
REDIAL TIMES
REDIAL INTERVAL
TIME OUT
14-6
Summary of Settings
Description
Enables/disables Error Correction Mode (ECM) during
transmission.
Selects the length of a pause entered within a
fax/telephone number with the Redial/Pause button.
Enables/disables automatic redialling if the other party's
line is busy on the first attempt (1 p. 7-9).
Selects the number of redial attempts.
Selects the time interval between redial attempts.
Enables/disables automatic scanning of documents
after the fax number is entered.
ON: Scanning begins automatically five seconds after
entering the fax number (10 seconds if sending to
multiple fax numbers).
OFF: Scanning does not start automatically. (You need
to press Start/Copy to begin scanning.)
Sub-Settings
ON
OFF
2 SEC
(1 to 15)
ON
OFF
2 TIMES
(1 to 10)
2 MIN.
(2 to 99)
ON
OFF
Chapter 14