Canon FAX-L290 User Manual page 166

Message
CHK SUBADDR/PSWD
CLEAR PAPER JAM
DOC. TOO LONG
ECM RX
ECM TX
LOAD PAPER
MEMORY FULL
13-10
Troubleshooting
Error Code Cause
#083/102 You attempted to send a
document or poll another
fax machine with the
incorrect subaddress
and/or password.
— There is a paper jam.
#003 The document is longer
than 1 metre.
— The unit is receiving
a fax using Error
Correction Mode (ECM).
— The unit is sending a
fax using Error
Correction Mode (ECM).
— The multi-purpose tray is
empty.
#037 The unit's memory is full
because it has received
too many documents, or
a very long or detailed
document.
The unit's memory is full
because you tried to
send or copy too many
pages at once, or a very
long or detailed
document.
Action
Contact the other party to
check their settings.
Change your settings if
necessary (1 pp. 6-3,
6-8, 9-10).
Clear the paper jam
(1 p. 13-3), then reload
paper in the multi-purpose
tray (1 p. 2-16).
Use a copier to make a
reduced copy of the
document and then send
the copy.
Receiving with ECM may
take longer than normal
receptions. Turn off ECM if
you need to receive quickly,
or if you know your local
lines are in good condition
(1 ECM RX, p. 14-7).
Sending with ECM may
take longer than normal
transmissions. Turn off
ECM if you need to
transmit quickly, or if you
know your local lines are in
good condition (1 ECM
TX, p. 14-6).
Load paper in the multi-
purpose tray (1 p. 2-16),
then press Stop.
Print any documents stored
in memory (1 p. 9-6).
Then start again.
Divide the document and
send or copy each part
separately. To free up
space in the unit's memory,
print, send, or delete any
documents in memory you
no longer need (1 p. 9-5).
Chapter 13