Receiving Faxes Automatically: Fax Only Mode; Setting Fax Only Mode - Canon FAX-L290 User Manual

Receiving Faxes Automatically: FAX ONLY MODE

If you have a separate telephone line for fax use only, connect your FAX to this line and
set FAX ONLY MODE. Your FAX will answer all calls as fax calls.

Setting FAX ONLY MODE

1
Press Receive Mode to select
FAX ONLY MODE.
• After a few seconds, the LCD changes
to this display:
If FAX ONLY MODE does not appear in the LCD when you press Receive Mode, follow
this procedure to set this mode:
1
Open the one-touch speed dial panel.
2
Press Data Registration.
3
Press Set.
Use ∂ or ¨ to select RX SETTINGS.
4
5
Press Set.
Use ∂ or ¨ to select RX MODE.
6
7
Press Set.
8 Use ∂ or ¨ to select FAX ONLY
MODE.
9
Press Set.
10
Press Stop to return to standby mode.
Chapter 8
FAX ONLY MODE
Ex:
15:00 FaxOnly
DATA REGSTRATION
USER SETTINGS
RX SETTINGS
ECM RX
RX MODE
Ex:
FAX/TEL AUTO SW
FAX ONLY MODE
INCOMING RING
Ex:
15:00 FaxOnly
Receiving Faxes
8-3