Printing A Document Stored In Memory - Canon FAX-L290 User Manual

Printing a Document Stored in Memory

Follow this procedure to print a document stored in memory:
n
When you print a document stored in memory using the following procedure, the print is
reduced to 90% of the original.
1
Open the one-touch speed dial panel.
2
Press Memory Reference.
3 Use ∂ or ¨ to select PRINT
DOCUMENT.
4
Press Set.
Use ∂ or ¨ to select the transaction
5
number (TX/RX NO.) of the
document you want to print.
• If you are unsure of the transaction
number (TX/RX NO.), print the DOC.
MEMORY LIST (1 p. 9-5).
• A "#" before the transaction number
(TX/RX NO.) indicates that that
document is being sent at that moment
and can therefore not be selected.
• Use ¬ or ® to display details of the
transaction (e.g. destination).
6
Press Set.
7 Press T to print the first page only, or
press # to print all pages of the
document.
• The FAX prints the document.
8
To continue printing other documents
in memory, repeat the procedure from
step 5.
-or-
Press Stop to return to standby mode.
9-6
Special Features
DOC. MEMORY LIST
PRINT DOCUMENT
Ex:
TX/RX NO.
Ex:
TX/RX NO. #0003
1ST PG ONLY?
YES=(A) NO=(#)
Ex:
15:00 FaxOnly
0001
Chapter 9