Making A Quick Single Copy - Canon FAX-L290 User Manual

7
If you want to make multiple copies,
use the numeric buttons to enter the
number of copies.
• You can make up to 99 copies.
n
The FAX copies at 400 × 300 dpi
for single copies, and at 200 × 300
dpi for multiple copies. For best
quality output, make one copy at a
time.
8
Press Start/Copy to begin copying.
• To cancel copying, press Stop. You may
then need to open the operation panel
to remove the document from the ADF
(1 p. 13-2).
n
You will be unable to make multiple copies if MEMORY FULL appears in the LCD. Print,
send, or delete any documents stored in memory to free up space in the FAX's memory
(1 p. 9-5), then start again. Also, if you are copying multiple pages with many graphics,
separate the pages into smaller stacks or make the desired number of copies one at a
time as needed.

Making a Quick Single Copy

Follow this procedure if you want to make a quick single copy of a document without
adjusting the resolution, contrast, or size:
1
Load the document, face down in the
ADF (1 p. 4-3).
2
Press Start/Copy twice to begin
copying.
• To cancel copying, press Stop. You
may then need to open the operation
panel to remove the document from
the ADF (1 p. 13-2).
Chapter 10
Ex:
COPY 80%
COPYING
Ex:
MEMORY USED 0%
(Currently used memory)
DOCUMENT READY
(Standby to scan)
COPY 100%
COPYING
Copying
05
01
10-3