Canon FAX-L290 User Manual page 72

12
Press Set.
13
This completes the basic coded speed
dialling settings.
To continue registering other coded
speed dialling codes, press Data
Registration and repeat the
procedure from step 7.
-or-
To end registering coded speed
dialling codes, press Stop to return
to standby mode.
-or-
To register the transmission type for
the current code you are registering,
continue with the steps below.
14
Press Set.
15 Use ∂ or ¨ to select ON.
16
Press Set twice.
Use ∂ or ¨ to select the transmission
17
type setting you want.
• You can select from the following:
– REGULAR TX
Normal transmission. (Choose this
setting if you previously set
PSWD/SUBADDRESS and no longer
want to send with this setting.)
– PSWD/SUBADDRESS
Transmission with a subaddress
and/or password. For details, see the
following page.
6-10
Speed Dialling
DATA ENTRY OK
OPTIONAL SETTING
Ex:
A02=
Ex:
15:00 FaxOnly
Ex:
TX TYPE
Ex:
REGULAR TX
OFF
ON
Chapter 6