Receiving Faxes Automatically: Fax Only Mode; Setting Fax Only Mode - Canon FAX-L280 User Manual

Receiving Faxes Automatically: FAX ONLY MODE

If you have a separate telephone line for fax use only, connect your FAX
to this line and set FAX ONLY MODE. Your FAX will answer all calls as
fax calls.

Setting FAX ONLY MODE

Your FAX is factory-set to FAX ONLY MODE. If you have not changed
the receive mode to Fax/Tel Mode or NET SWITCH*, simply follow this
procedure:
1
Press Receive Mode to select FAX
ONLY MODE.
After a few seconds, the LCD
changes to this display:
If FAX ONLY MODE does not appear in the LCD when you press Receive
Mode, follow this procedure to set this mode:
1
Open the one-touch speed dial panel.
2
Press Data Registration.
3
Press Set.
4
Use
SETTINGS.
5
Press Set.
6
Use
7
Press Set.
8
Use
MODE.
9
Press Set.
* NET SWITCH is only available for Australia and New Zealand.
Chapter 8
or to select RX
. .
or to select RX MODE.
. .
or to select FAX ONLY
. .
FAX ONLY MODE
Ex:
15:00 FaxOnly
DATA REGSTRATION
USER SETTINGS
RX SETTINGS
ECM RX
RX MODE
Ex:
FAX/TEL AUTO SW
FAX ONLY MODE
INCOMING RING
Receiving Faxes
8-3