Receiving Faxes Automatically: Fax Only Mode - Canon FaxPhone L360 User Manual

N
If you have an answering machine connected to your FAX-L360 that can
carry out remote-control operations (controlling your answering machine
from a remote telephone), the security code for this function may be the
same as the two-digit ID code described above. If so, make sure you
change the FAX-L360 two-digit ID code to make it distinct from the
answering machine's security code. See pages 15-10 and 15-12 for details
on changing the code (REMOTE RX ID setting).

Receiving Faxes Automatically: FAX ONLY MODE

When the FAX-L360 is set up for a dedicated line, set FAX ONLY MODE
to automatically receive documents whenever a call comes over the fax
line.
Chapter 7
The FAX-L360 then begins receiving the document. (This is
particularly convenient if your telephone is located away from
the FAX-L360.)
If you do not hang up after pressing Start/Copy or the two-digit
ID code, the unit beeps intermittently for a few seconds after you
receive the document. (You can turn the beeping off by disabling
the OFFHOOK ALARM in the USER SETTINGS menu. See
pages 15-3 and 15-4 for details.)
The FAX-L360 assumes all incoming calls are from fax machines
sending documents. It receives the documents automatically and
disconnects all voice calls.
In FAX ONLY MODE, you can control whether or not the
FAX-L360 rings when it receives a fax call. To set this option from
the FAX-L360 operation panel, see pages 15-10 and 15-10
(INCOMING RING setting).
7-11
Receiving Faxes