Receiving Faxes Automatically: FAX ONLY MODE
If you have a separate telephone line for fax use only, connect your FAX to this line and
set FAX ONLY MODE. Your FAX will answer all calls as fax calls.
Setting FAX ONLY MODE
Your FAX is factory-set to FAX ONLY MODE. If you have not changed the receive
mode to Fax/Tel Mode or NET SWITCH*, simply follow this procedure:
1
Press Receive Mode to select
FAX ONLY MODE.
• After a few seconds, the LCD changes
to this display:
If FAX ONLY MODE does not appear in the LCD when you press Receive Mode, follow
this procedure to set this mode:
1
Open the one-touch speed dial panel.
2
Press Data Registration.
3
Press Set.
Use ∂ or ¨ to select RX SETTINGS.
4
5
Press Set.
Use ∂ or ¨ to select RX MODE.
6
7
Press Set.
Use ∂ or ¨ to select FAX ONLY
8
MODE.
9
Press Set.
* NET SWITCH is only available for Australia and New Zealand.
Chapter 8
FAX ONLY MODE
Ex:
15:00
FaxOnly
DATA REGSTRATION
USER SETTINGS
RX SETTINGS
ECM RX
RX MODE
Ex:
FAX/TEL AUTO SW
FAX ONLY MODE
INCOMING RING
Receiving Faxes
8-3