Configure Network Authentication Settings; Enable Smartcard Settings; Configure Smartcard Link Mode Settings; Setting The Smartcard Certificate Verification Mode - Xerox D95 System Administration Manual

Using the Scan Service
• Connect your card reader to the printer

Configure Network Authentication Settings

1. Configure network authentication.
2. Configure Kerberos server settings.

Enable SmartCard Settings

1. At the printer control panel, press the Machine Status button and touch the Tools
tab.
2. Select Authentication / Security Settings > Authentication > User Details Setup
> Use of SmartCard.
3. Select Change Settings.
4. Select Enabled.
5. Under Jobs Validated by Card, select Copy, Print, or Scan, and select Save.

Configure SmartCard Link Mode Settings

1. At the printer control panel, press the Tools button and touch the Tools tab.
2. Select Authentication / Security Settings > Authentication > User Details Setup
> SmartCard Link Mode.
3. Select Change Settings.
4. Select No Passcode Required, and touch Save.

Setting the SmartCard Certificate Verification Mode

For additional security, you can set the printer to validate a user s SmartCard against
certificates stored on the printer.
1. At the printer control panel, press the Machine Status button and touch the Tools
tab.
2. Select Authentication / Security Settings > Authentication > User Details Setup
> SmartCard Certificate Verification.
3. Select Change Settings.
4. Select Enabled.

Configuring Certificate Revocation Retrieval Settings

Configure Security Certificate Revocation Retrieval settings as necessary.
Note
The root CA and intermediate CA of the user s SmartCard certificate must be stored on
the printer. The printer date and time settings must be correct to validate the certificate.
5-8 Xerox ® D95/D110/D125/D136 Copier/Printer
System Administration Guide