Receiving Buffer - Lpd; Receiving Buffer - Netware; Receiving Buffer - Smb Spool; Receiving Buffer - Ipp Spool - Xerox D95 System Administration Manual

Receiving Buffer - LPD

• Off: When Off is selected, the machine will not use spooling. During the LPD print
process for one client, data cannot be received over that same interface from a
different client. Set a value for the dedicated LPD receiving buffer memory capacity
from 1024-2048 KB, in 32 KB increments.
• Memory Spool: When selected, the machine will use spooling. The receiving buffer
for spooling uses memory. When this candidate value is selected, set the memory
capacity of the receiving buffer for spooling, from 0.50 MB to 32.00 MB, in 0.25 MB
increments.
Note
Notice that print data exceeding the set memory capacity is not accepted. In such cases,
select Hard Disk or Off.
• Hard Disk Spool: When selected, the machine will use spooling. The receiving buffer
for spooling uses the hard disk.

Receiving Buffer - NetWare

Set the NetWare receiving buffer. Set a value from 64 to 1024 KB, in 32 KB increments.

Receiving Buffer - SMB Spool

• Off: When Off is selected, the machine will not use spooling. While SMB print
processing is being carried out for one client, data cannot be received over the same
interface from another client.
Set a value for the dedicated SMB receiving buffer memory capacity from 64 to 1024
KB, in 32 KB increments.
• Memory Spool: When selected, the machine will use spooling. The receiving buffer
for spooling uses memory. When this candidate value is selected, set the memory
capacity of the receiving buffer for spooling from 0.50 MB to 32.00 MB, in 0.25 MB
increments.
Note
Notice that print data exceeding the set memory capacity is not accepted. In such cases,
select Hard Disk or Off.
• Hard Disk Spool: When selected, the machine will use spooling. The receiving buffer
for spooling uses the hard disk.

Receiving Buffer - IPP Spool

• Off: When Off is selected, the machine will not use spooling. While IPP print processing
is being carried out for one client, data cannot be received over the same interface
from another client. Set a value for the dedicated IPP receiving buffer memory
capacity from 64 to 1024 KB, in 32 KB increments.
Xerox ® D95/D110/D125/D136 Copier/Printer
System Administration Guide
System Settings
10-53