Create/View/Edit A User Account (Authentication / Security Settings > Authentication) - Xerox D95 System Administration Manual

Note
Do not change the setting while a file is stored for the Private Charge Print. Otherwise,
you may encounter problems, such as the inability to print. Change the setting after
the machine prints all the stored files.
• Smart Card Link Mode: Set whether or not to require a passcode for Smart Card
authentication.
• Smart Card Certificate Verification: Set whether or not to verify the Smart Card
Certificate when a user uses the Smart Card. When Enabled is selected, the owner
of the Smart Card is verified by a combination of PIN code verification, verification
of the Smart Card, and private key match. When Disabled is selected, the owner of
the Smart Card is verified by PIN code verification.
• Smart Card Logout Timing: Select the logout method for Smart Card authentication
when a Smart Card that does not require physical contact is used for authentication.
When Log Out when Card is Removed is selected, you can log out from the machine
by removing the Smart Card from the Smart Card Reader. When Log Out from Control
Panel is selected, you can log out by operating the touch screen or control panel.
• Save remote accounts in this machine: Select whether or not to save the registered
user information on the machine. This option allows the local machine to authenticate
users even when the remote server is offline.
Note
This option only applies to users who are authenticated by smart cards.
• Delete Remote Accounts: Select whether or not to delete remote user information
that is saved to the machine.
Note
This option only applies to users who are authenticated by smart cards.
Maximum Login Attempts
This feature protects the settings from being changed by someone impersonating the
system administrator. If the administrator s authentication fails for more than a
specified number of continuous times, access is denied. Select between 1-10 for the
number of maximum login attempts.
Passcode Policy
Select whether or not a passcode is required when a user or the administrator uses the
machine. This feature is used for entry through the machine s control panel. When
using remote devices, such as CentreWare Internet Services, a passcode must ALWAYS
be entered. A passcode must be 4-12 digits.
Create/view/edit a user account (Authentication / Security Settings >
Authentication)
1. Log in as the administrator.
2. Access the Tools tab on the UI.
Xerox ® D95/D110/D125/D136 Copier/Printer
System Administration Guide
Accounting and Authentication / Security Settings
12-23