Ntp Time Synchronization; Connection Interval - Xerox D95 System Administration Manual

System Settings
2. Select Machine Status on the Control Panel.
3. Access the Tools tab on the UI.
4. Select System Settings > Common Service Settings.
5. Select Machine Clock/Timers.
6. Select the item to be set or changed.
7. Select Change Settings.
8. Select the desired setting for the option.
9. Select Save.
The previous screen displays.
10. Select another option to set or change and repeat the previous steps as needed.
11. Select Close.
The main Tools tab screen displays.
12. Exit the administrator mode.
Date and Time
Use the following instructions to setup the Date and Time for the printer.
1. Select Machine Status from the Control Panel.
2. Select the Tools tab, System Settings and select Common Service Settings.
3. Select Machine Clock/Timers.
4. Select Date and select Change Settings. Enter the Date Format and then the day,
month and year.
5. Select Save.
6. Select Time and select Change Settings. Select either 12 Hour Clock or 24 Hour
Clock. Then select the hours and select Save.

NTP Time Synchronization

You can get the time from a time server (NTP: Network Time Protocol), to synchronize
the machine to the time server time.
1. From the Machine Clock/Timers screen, select NTP Time Synchronization, and select
Change Settings.
2. Select On or Off.
3. Select Save to save the settings and return to the previous window.

Connection Interval

Select the time interval at which a connection is made to the time server.
Select an interval from 1 through 500 hours, in steps of one hour.
1. From the Machine Clock/Timers screen, select Connection Interval, and select Change
Settings.
2. Enter the Connection Interval using the numeric keypad.
3. Select Save to save the settings and return to the previous window.
10-4 Xerox ® D95/D110/D125/D136 Copier/Printer
System Administration Guide