Xerox D95 System Administration Manual page 39

Copier/printer
Hide thumbs Also See for D95:
Table of Contents

Advertisement

Note
When using the CentreWare software to manage the machine by remote control, enable
the SNMP port.
SNMP settings can be configured in CentreWare IS. You can also enable or disable
Authentication Failure Generic Traps on the printer. SNMPv3 can be enabled to create
an encrypted channel for secure printer management.
1. Perform the following to access the network protocol settings.
a. Connect to CentreWare Internet Services.
b. Click the Properties tab.
c. Click to the left of Connectivity and to the left of Protocols to display the items
in the folder.
2. Click SNMP Configuration.
Note
Another option that exists is called Enable SNMP v3 Properties. If using this option,
configure HTTPS before configuring SNMP v3. Configuring this feature requires secure
web page communications. Also, SSL must be enabled.
3. Under SNMP Properties, select Enable SNMP v1/v2c or v3) Protocols.
4. Select Apply.
5. Under Authentication Failure Generic Traps, select Enabled for the printer to generate
a trap for every SNMP request that is received by the printer that contains an invalid
community name.
6. Select Apply.
7. To change the SNMP public and private community names from the default values:
a) type a name up to 256 characters for the Community Name (Read only),
Community Name (Read/Write), and Trap Community Name (Trap
Notification).
b) Set the System Administrator's Login ID.
c) Reflect the values as the machine s setting values.
d) Click Apply. A screen to enter the user name and password may display.
e) The right frame on the web browser will change to the machine reboot display.
Note
The default User ID value is admin and password is 1111.
f) Click Reboot. The machine will reboot and the setting value will be reflected.
Note
Xerox recommends you change the SNMP v1/v2c public and private community
names for security purposes.
8. To edit SNMP v3 settings:
a) Under SNMP Properties, select Edit SNMP v3 Properties.
b) Under Administrator Account, select Account Enabled to create the administrator
account.
Xerox
®
D95/D110/D125/D136 Copier/Printer
System Administration Guide
Using CentreWare Internet Services
3-9

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

D136D110D125

Table of Contents