Remote Authentication Server Settings; Kerberos Server Settings; Smb Server Settings - Xerox D95 System Administration Manual

System Settings
Note
The paper type selections for this feature will vary depending on your machine and your
work environment requirements, such as the types of paper you use most frequently.
Note
The paper type setting takes precedence over the tray priority sequence. If different
paper types appear in the same priority sequence, the paper selection is determined by
the tray priority sequence.
1. From the Paper Tray Settings screen, select Paper Type Priority.
2. Select the item to be set or changed, and select Change Settings.
3. Select the priority sequence for this paper type.
4. Select Save to save the setting and to return to the Paper Type Priority screen.
5. Select Close to return to the Paper Tray Settings screen.

Remote Authentication Server Settings

This feature sets the remote authentication server; a maximum of five servers can be
set.
Note
This feature does not appear for some models. An optional package is necessary. For
more information, contact our Customer Support Center.
1. Select Connectivity & Network Setup > Remote Authentication Server Settings.
2. Select Remote Authentication Server Settings.
3. Select Authentication System Setup and then Change Settings.
4. Select Authentication System.
5. You can select the system for authentication from Kerberos (Windows2000) or
Kerberos (Solaris), LDAP, SMB, or Authentication Agent.

Kerberos Server Settings

1. Select Kerberos Server Settings.
2. Select a Kerberos Server.
3. Select Change Settings.
4. In Kerberos Server Settings, you can set the following items:
• Primary Server Name/Address
• Primary Server Port Number
• Secondary Server Name/Address
• Secondary Server Port Number
• Domain Name
5. Repeat steps 1 through 4 for any additional servers.

SMB Server Settings

1. Select SMB Server Settings.
10-48 Xerox ® D95/D110/D125/D136 Copier/Printer
System Administration Guide