Table of Contents
Advertisement
Setting the auto repeater shift
When communicating using the repeater, the repeater auto shift function automatically
shifts the transmit frequency to match the repeater input frequency This allows the
repeater to be used by simply tuning the FTM-400XDR/DE to the repeater output
frequency This setting may turned ON or OFF.
1
Press
for one second or longer
The set-up menu will be displayed.
2
Touch [CONFIG]
3
Touch [4 AUTO RPT SHIFT] to select ON/OFF
The setting will switch between "ON" and "OFF" each
time it is touched.
ON: The auto repeater shift function will be switched
on.
OFF: The auto repeater shift function will be switched
off.
Tip
Factory default value: ON
4
Press
for one second or longer
The auto repeater shift will be set and the display will return to the previous screen.
Setting the direction of the repeater shift
The direction of the repeater shift function can be set.
1
Press
for one second or longer
The set-up menu will be displayed.
2
Touch [CONFIG]
Using the Set-up Menu
189
Advertisement
Table of Contents
