Menu B 33 Rpt.mod; Menu #34 Scan - Yaesu FT-8900R Operating Manual

Menu b 33 RPT.MOD

Function:
Sets the
Values: RPT.OFF
Default: RPT.OFF

The value for this Menu Item is to be applied separately for each
Operating Band / Mode.

Menu #34 SCAN

Function:
Selects the
See
Set the Scan-Resume Preference
Values: TIME
, BUSY
TIME
BUSY
Default: BUSY

This Menu Item can be set independently for each band.
Yaesu FT-8900R Operating Manual Expanded Edition (courtesy of W5JCK)
Repeater Shift Direction
, RPT. – , RPT. +
(simplex)
mode.
Scan-Resume
Scanning will halt on a signal it encounters, and will hold five seconds. If
you do not take action to disable the scanning within five seconds, scanning
will resume even if the stations are still active.
Scanning will halt on a signal it encounters. Two seconds after the carrier
has dropped because the other station(s) ceased transmission, scanning
will resume.
.
on page 42 for details.
MENU ITEMS
Page 73 of 77