Preferential Memory Scan - Yaesu FTM-7250DR Advance Manual

Scanning

Preferential Memory Scan

The FTM-7250DR also allows setting up a "Preferential Scan List" of channels, which you
can "flag" within the memory system. The flagged channels are designated by an "
when they are selected, one by one, for the Preferential Scan List.
When memory scanning is initiated beginning on a channel with the "
those channels bearing the "
which does not have the "
appended will be scanned.
Here is the procedure for setting up and using the Preferential Scan List:
1. Set the radio to the Memory Recall mode by press-
ing the [ V/M ( MW )] key repeatedly, as necessary,
until "MR" and a channel number appear on the
right side of the display.
2. Rotate the DIAL knob to select the Memory Chan-
nel that you wish to add to the preferential Scan
List.
3. Press and hold the [ MHz ( SETUP )] key, then rotate
the DIAL knob to select "SCAN SKP 40".
4. Press the [ MHz ( SETUP )] key, and then rotate the
DIAL knob to select "SELECT".
5. Press and hold the [ MHz ( SETUP )] key to save the
new setting and exit to normal operation.
To initiate Preferential Memory Scanning:
1. Set the radio to the Memory Recall mode by pressing the [ V/M ( MW )] key repeatedly, if
necessary.
2. Rotate the DIAL knob to select any memory chan-
nel which has an "
nel number.
3. Press and hold in either the microphone [ UP ] or [ DWN ] button to initiate Preferential
Memory Scanning. Only the channels which have a "
number will be scanned.
" icon will be scanned. If scanning is initiated on a channel
u
" icon appended, all channels including those with the "
u
" icon appended to the chan-
u
" icon appended to the channel
u
21
" icon
u
" icon appended, only
u
" icon
u