Mh−48A6J Microphone Overview - Yaesu FT-8900R Operating Manual

MH−48A6J Microphone Overview
(3) Programmable Buttons
You can program any of the Programmable buttons for the following functions:
LOW , MHz , PRI , REV ,
(See
Program the Microphone Buttons
button: default setting is BAND function
Press this button to switch the
LCD screen. This is the best and easiest way to set the
prefer.
Press and hold this button for ½ second to move operation to the next-highest
frequency band on the
button: default setting is VFO/MR function
Press this button momentarily to switch the frequency control for the
between the
When the
Main
to activate the Smart Search Feature.
When the
Main
second to activate the Memory Bank feature.
Yaesu FT-8900R Operating Manual Expanded Edition (courtesy of W5JCK)
(1) PTT Switch
Press this switch to transmit, and release it to receive.
(2) Keypad
The 12 number keys generate DTMF tones during
transmission.
In the receive mode, these keys can be used for direct
frequency entry and/or direct numeric recall of the Memory
channels.
RPTR , SCAN , SQL.OFF
on page 13 for details.)
Main
band.
Main
and Memory Systems.
VFO
band is set to the
VFO
band is set to the
Memory

The A, B, C, and D keys serve no
function on the FT−8900R.
, TCALL , TONE , VFO/MR
band between the Left and Right displays on the
mode, press and hold in this button for ½ second
mode, press and hold in this button for ½
INTRODUCTION
BAND
.
band to the side you
Main
band
Main
Page 11 of 77
HOME
, ,