Setting The Time The Backlight Stays Lit; Adjusting The Backlight's Brightness; Specifying The Zone Used With The Main Remote Control - Denon AVR-4310 Owner's Manual

ENGLISH
Operating the Main Remote Control Unit
Signal
transmission
indicator
[DEVICE
SELECTOR]
[ MAIN]
[CHANNEL +, –]
[0 ~ 9]
[RC SETUP]


Setting the Time the Backlight Stays Lit

1
Press and hold in
[ SAT/CBL]
The signal transmission indicator flashes twice.
2
Press [9]
The signal transmission indicator flashes twice and the backlight
[ TV]
on time setting mode is set.
3
Set the light on time.
The signal transmission indicator flashes twice.
[Settable times] :

Adjusting the Backlight's Brightness

The display's brightness can be adjusted in 5 steps.
(Default: Step 5)
1
Press and hold in
The signal transmission indicator flashes twice.
2
Press [CHANNEL +]
The display gets one step brighter when
[MACRO]
pressed.
The display gets one step darker when
pressed.
3
[RC SETUP]
Press
[RC SETUP] for at least 3 seconds.
, [7] and [3] , in that order.
[1]
: 5 sec.
[2]
: 10 sec. (Default)
[3]
: 15 sec.
[4]
: 20 sec.
[5]
: 25 sec.
[RC SETUP] for at least 3 seconds.
or [CHANNEL –] .
[CHANNEL +]
[CHANNEL –]
to complete the setting.
Specifying the Zone Used with the Main
Remote Control
[MAIN]
When the Device Select button is pressed, only the set
zone can be operated with the main remote control unit.
1
Press [MAIN] to light the "MAIN" zone indicator.
2
[RC SETUP]
Press and hold in
The signal transmission indicator flashes twice.
3
[9] [9] [9]
Press , and , in that order.
The signal transmission indicator flashes twice and the backlight
on time setting mode is set.
4
[1 ~ 4]
Press to set.
The signal transmission indicator flashes twice.
[Settable items]
[1]
: When only using "MAIN" / "MACRO"
[2]
: When using "MAIN" / "Z2" / "MACRO"
[3]
: When using "MAIN" / "Z2" / "Z3" / "MACRO"
[4]
: When using "MAIN" / "Z2" / "Z3" / "Z4" / "MACRO"
(Default)
is
is
for at least 3 seconds.