Table of Contents
Advertisement
Setting items
Network Connecting
q On the GUI menu, select "Network Connecting" – "Detail" and
ENTER
Make settings for wired
press
w Use
o p
LAN.
The DHCP function is disabled.
e Use
uip
•
IP Address : Set the IP address within the ranges shown below.
The Network Audio function cannot be used if other IP addresses
are set.
CLASS A: 10.0.0.0 ~ 10.255.255.255
CLASS B: 172.16.0.0 ~ 172.31.255.255
CLASS C: 192.168.0.0 ~ 192.168.255.255
•
Subnet Mask : When connecting an xDSL modem or terminal
adapter directly to the AVR-4310, input the subnet mask indicated
in the documentation supplied by your provider. Normally input
255.255.255.0.
•
Default Gateway : When connected to a gateway (router), input
its IP address.
•
Primary DNS, Secondary DNS : If there is only one DNS address
indicated in the documentation supplied by your provider, input it
at "Primary DNS". If there are two or more DNS addresses, input
the first one at "Secondary DNS".
r Use
i
to select "Exit" and press
Setup is complete.
When connecting to the network via a Proxy server, select "Proxy" and
b
ENTER
press
•
If you are using a broadband router (DHCP function), there is no need
to make the settings at "IP Address" and "Proxy", since the DHCP
function is set to "ON" in the AVR-4310's default settings.
•
If the AVR-4310 is being used connected to a network without the
DHCP function, the network settings must be made. In this case, some
knowledge of networks is required. For details, consult a network
administrator.
•
If you cannot connect to the Internet, recheck the connections and
settings (vpage 22).
•
If you do not understand about Internet connection, contact your ISP
(Internet Service Provider) or the store from which you purchased your
computer.
•
When you want to cancel the setting during IP address input, press
RETURN
.
Main remote control
operation buttons
Setting contents
.
to set "DHCP" to "OFF", then press
i
.
ENTER
to input the address and press
.
ENTER
.
(vpage 39 "Proxy settings").
:Displaying the menu
Cancel the menu
Setting items
Network Connecting
Proxy settings : Make this setting when connecting to the Internet via a
(Continued)
proxy server.
DHCP
IP Address
Exit
Detail
Set IP address and proxy manually
q On the GUI menu, select "Network Connecting" – "Detail" and press
ENTER
w Use
e Use
The proxy server is enabled.
r Use
Address : Select when inputting by address.
Name : Select when inputting by domain name.
t Use
press
When "Address" is selected in step r : Input the address
When"Name" is selected in step r : Input the domain name
The types of characters that can be input are as shown below.
GLower case charactersH abcdefghijklmnopqrstuvwxyz
GUpper case charactersH ABCDEFGHIJKLMNOPQRSTUVWXYZ
GSymbolsH ! # " $ % & ' ( ) * + , - . / : ; < = > ? @ [ \ ] ˆ _ ` { | } ˜
GNumbersH 0123456789
:Moves the cursor
:Confirm the setting
(Up/Down/Left/Right)
Making Detailed Settings (Manual Setup)
Setting contents
NETWORK CONNECTING
NETWORK CONNCTING
DHCP
ON
IP Address
Subnet Mask
192.168.100.33
Default Gateway
Primary DNS
Secondary DNS
Proxy
Exit
q
Enter
Set if using proxy server
NETWORK CONNCTING
Proxy
ON
e
Proxy
r
Address
000 . 000 . 000 . 000
Address
Port
00000
y
Exit
u
Cancel
RETURN
Proxy server is used
.
ENTER
ui
to set "Proxy" and press
.
o p
to set "Proxy" to "ON" and press
i
.
o p
to select the proxy server input method, and then press
uio p
to input the proxy server address or domain name and
ENTER
.
(Space)
You can change the character type when you press
MENU
during character input.
:Return to previous menu
ENGLISH
ON
192 .168 . 100 . 033
255 .255 . 255 . 000
192 .168 . 100 . 001
192 .168 . 100 . 001
000 .000 . 000 . 000
w
Enter
Cancel
RETURN
t
i
.
[SEARCH]
or
See overleaf
Hide quick links:
Advertisement
Table of Contents
