Table of Contents
Advertisement
Adjusting the Sound and Picture Quality (Audio/Video Adjust)
For details on how to select, set and cancel settings for each menu, see "GUI Menu Operation" (vpage 25).
Adjusting the Sound (Audio Adjust)
The sound being played in the surround mode can be adjusted to your liking.
The items (parameters) that can be adjusted depend on the signal being input and the currently set surround
mode. For details on the adjustable parameters, see "Surround Modes and Parameters" (vpage 99).
Setting items
Surround Parameters
Mode : Set the play modes for the different surround modes.
Adjust
surround
sound
parameters.
n
In the PLgx or PLg mode
Cinema : Surround sound mode optimized for movie sources.
Music : Surround sound mode optimized for music sources.
Game : Surround sound mode optimized for games.
Pro Logic : Dolby Pro Logic playback mode (PLg mode only).
n
In the PLgz mode
Height : Dolby PLgz Height playback mode.
n
In the DTS NEO:6 mode
Cinema : Surround sound mode optimized for movie sources.
Music : Surround sound mode optimized for music sources.
•
When "Surround Parameters" – "Front Height" (vpage 70) is set to
"ON", the "Height" mode is set automatically.
•
The "Music" mode is also effective for movie sources including a lot of
stereo music.
Cinema EQ : Soften the treble range of movie soundtracks for better
understanding.
•
OFF : "Cinema EQ" is not used.
•
ON : "Cinema EQ" is used.
DRC : Compress dynamic range (difference between loud and soft
sounds)
•
Auto : Automatic dynamic range compression on/off control according
to source. This can be set in the Dolby TrueHD mode.
•
Low / Middle / High : These set the compression level.
•
OFF : Dynamic range compression always off
D.COMP : Compress dynamic range (difference between loud and soft
sounds).
•
OFF : Turn dynamic range compression off.
•
Low / Middle / High : These set the compression level.
Main remote control
operation buttons
Default settings are underlined.
Setting contents
:Displaying the menu
Cancel the menu
Setting items
Surround Parameters
LFE : Adjust the low-frequency effects level (LFE).
(Continued)
•
–10dB ~ 0dB
For proper playback of the different sources, we recommend setting
to the values below.
•
•
•
Center Image : Assign center channel signal to front left and right channels
for wider sound.
•
0.0 ~ 1.0 (0.3)
Panorama : Assign front L/R signal also to surround channels, for wider
sound.
•
OFF : Do not set.
•
ON : Set.
Dimension : Shift sound image center to front or rear, to adjust playback
balance.
•
0 ~ 6 (3)
Center Width : Assign center channel signal to front left and right channels
for wider sound.
•
0 ~ 7 (3)
Delay Time : Adjust delay time to control sound stage size.
•
0ms ~ 300ms (30ms)
Effect : Switch effect signal for multi-surround speakers on and off.
•
ON : Create a wider sound stage.
•
OFF : The effect is not set.
Effect Level : Adjust effect signal level.
•
1 ~ 15 (10)
Set to a lower level if the positioning and sense of phase of the
surround signals seems unnatural.
Room Size : Determine size of acoustic environment.
•
Small : Simulate acoustics of a small room.
•
Medium small : Simulate acoustics of a medium-small room.
•
Medium : Simulate acoustics of a medium room.
•
Medium large : Simulate acoustics of a medium-large room.
•
Large : Simulate acoustics of a large room
NOTE
"Room Size" does not indicate the size of the room in which sources are
played.
:Moves the cursor
:Confirm the setting
(Up/Down/Left/Right)
Setting contents
Dolby Digital sources : "0dB"
DTS movie sources : "0dB"
DTS music sources : "–10dB"
:Return to previous menu
ENGLISH
See overleaf
Hide quick links:
Advertisement
Table of Contents
