Input Mode - Denon AVR-4310 Owner's Manual

Setting items
i/p Scaler Analog : Use i/p scaler function for analog video signal.
The input source's resolution Analog & HDMI : Use i/p scaler function for analog and HDMI video
is converted to the resolution signal.
set at "Resolution". OFF : Do not use i/p scaler function.
• This can be set when "Video Convert" is set to "ON".
• "Analog & HDMI" can be set for input sources for which an HDMI input
terminal is assigned.
• When "i/p Scaler" is set to "Analog & HDMI", it has no effect on the x.v.
Color signal or computer resolutions.
Resolution Auto : The number of pixels the TV connected to the HDMI output terminal
Set resolution of the video supports is detected automatically and the appropriate output resolution
signal output to HDMI. is set.
480p/576p / 1080i / 720p / 1080p / 1080p:24Hz : Set the output
resolution.
• This can be set when "i/p Scaler" is set to anything other than "OFF".
• When "i/p Scaler" is set to "Analog & HDMI", the resolution of both the
analog video input signal and HDMI input signal can be set.
• To watch 1080p/24Hz pictures, use a TV that supports 1080p/24Hz video
signals.
• When set to "1080p/24Hz", you can enjoy film-like pictures for film
sources (in 24 Hz). For video sources and mixed sources, we recommend
setting the resolution to "1080p".
• It is not possible to convert a 50 Hz signal into 1080p/24Hz. It is output
at a resolution of 1080p/50Hz.
Progressive Mode This can be set when the input source is DVD
Select optimum progressive
VCR DVR
mode for video material.
Auto : The video material is automatically detected and the appropriate
mode is set.
Video 1 : Select mode suitable for video playback
Video 2 : Select mode suitable for video and 30-frame film material
playback.
This can be set when "i/p Scaler" is set to anything other than
"OFF".
Aspect
This can be set when the input source is DVD
Set the aspect ratio for the
VCR DVR
video signals output to the
Full : Output at 16:9 aspect ratio.
HDMI.
Normal : Output at 4:3 aspect ratio.
This can be set when "i/p Scaler" is set to anything other than
"OFF".
Main remote control
operation buttons
Setting contents
HDP TV
V.AUX .
HDP TV
V.AUX NET/USB .
:Displaying the menu
Cancel the menu
Changing the Input Mode and Decoding Mode

(Input Mode)

The selectable input modes depend on the input source and "Input Assign" (
Setting items
Input Mode Auto : Automatically detect input signal and perform playback.
Set the audio input modes for HDMI : Play only signals from HDMI input.
the different input sources. Digital : Play only signals from digital input.
Analog : Play only signals from analog input.
EXT. IN : Play only signals from EXT. IN input.
•
•
•
•
•
Decode Mode
This can be set when the input source is
SAT/CBL
Set the decode mode for
input source
Auto : Detect type of digital input signal and decode and play
automatically.
PCM : Decode and play only PCM input signals.
DTS : Decode and play only DTS input signals.
•
•
SAT/CBL
:Moves the cursor
:Confirm the setting
(Up/Down/Left/Right)
Making the Input Settings (Source Select)
Default settings are underlined.
Setting contents
"HDMI" can be set for input sources for which "HDMI" is assigned at
"Input Assign".
"Digital" can be set for input sources for which "Digital" is assigned at
"Input Assign".
When digital signals are properly input, the "
the display. If the " " indicator does not light, check the digital input
connector assignment and the connections.
The surround mode cannot be set if the input mode is set to "EXT. IN".
<INPUT MODE>
This can also be set by pressing
the button, the input mode display will change.
Auto HDMI
EXT. IN Analog
V.AUX .
SAT/CBL VCR DVR
This can be set for input sources for which "HDMI" or "Digital" is
assigned at "Input Assign" (vpage 47).
Normally set this to "Auto". Set "PCM" and "DTS" when inputting the
corresponding input signal.
:Return to previous menu
ENGLISH
v page 46) setting.
" indicator lights on
. Each time you press
Digital
CD DVD HDP TV
See overleaf