Denon AVR-4310 Owner's Manual page 76

ENGLISH
Adjusting the Sound and Picture Quality (Audio/Video Adjust)
Setting items
Dynamic Volume : Solves the problem of large variations in volume level
Audyssey Settings
between TV, movies and other content (between quiet passages and loud
(Continued)
passages, etc.) by automatically adjusting to the user's preferred volume
setting.
• ON : Use the "Dynamic Volume" equalizer. The Dynamic Volume effect
will be at the level of the "Setting" (vpage 72).
• OFF : Do not use the "Dynamic Volume" equalizer.
• "
• When "MultEQ XT" is set to "OFF", "Dynamic Volume" is automatically
set to "OFF".
• You can also press
Audyssey Dynamic Volume™ solves the problem of large variations in
volume level between television programs, commercials, and between
the soft and loud passages of movies.
Audyssey Dynamic EQ™ is integrated into Dynamic Volume so that
as the playback volume is adjusted automatically, the perceived bass
response, tonal balance, surround impression, and dialog clarity remain
the same.
Setting : Set "Dynamic Volume" equalizer effect.
• Midnight : High setting affects volume the most, causing all sounds to
be of equal loudness.
• Evening : Middle setting prevents loud and soft sounds from being
much louder and softer respectively than average sounds.
• Day : Low setting provides the least adjustments to the loudest and
softest of sounds.
Can be set when "Dynamic Volume" is set to "ON".
Audyssey DSX Settings DSX : Provides more immersive surround sound by adding the new
Adjust DSX setting and channels.
sound stage parameters. • ON : Set Audyssey DSX to expand surround.
• OFF : Do not set Audyssey DSX.

Main remote control
operation buttons
Setting contents
" is displayed when set to "ON".
[DYNAMIC VOLUME]
to set.
Dynamic EQ / Volume : ON Dynamic EQ : ON / Volume : OFF
"Green" "Red"
"Green" "Red"
About Dynamic Volume
:Displaying the menu
Cancel the menu
Setting items
Audyssey DSX Settings Stage Width : Adjust sound stage width when using front wide
(Continued) speakers.
• –10 ~ 0
Stage Height : Adjust sound stage height when using front height
The "Audyssey DSX
Settings" cannot be speakers.
configured if the HD Audio • –10 ~ 0
source being played includes
Front height and Front wide
channels. In this case, the • "DSX" can be set when you are using front height speakers or front
respective channels are wide speakers.
• "DSX" is only valid when using a center speaker.
played back using the input
signals. • "DSX" is valid when surround mode is STANDARD mode other than
PLgz Height.
• "DSX" can be operated by
indicator lights on the display.
• The "Audyssey DSX Settings" cannot be configured if the HD Audio
source being played includes Front height and Front wide channels.
In this case, the respective channels are played back using the input
signals.
About Audyssey Dynamic Surround Expansion (DSX)
Audyssey DSX is a scalable surround expansion system that adds new
channels to improve the surround impression. Based on research in
human hearing DSX adds a pair of Wide channels in the front because
that information is critical in the rendering of a realistic soundstage.
DSX then adds a pair of Height channels above the main front channels
to reproduce the next most important acoustical and perceptual cues
related to soundstage depth. In addition to creating these new channels,
DSX applies Surround Envelopment Processing to enhance the blend
between the front and side/back surround channels. The result is a
much more seamless and enveloping home theater experience.
Manual EQ Adjust CH : Correct the tone of each speaker.
Use the graphic equalizer
q Select the speaker tone adjustment method.
to adjust the tone of each
All : Adjust the tone of all speakers together.
speaker.
L/R : Adjust the tone of left and right speakers together.
Each : Adjust the tone of each speaker.
w Select the speaker.
e Select the adjustment frequency band.
63Hz / 125Hz / 250Hz / 500Hz / 1kHz / 2kHz / 4kHz / 8kHz / 16kHz
b
r Adjust the level.
–20.0dB ~ +6.0dB (0dB)
Can be set when the "MultEQ XT" setting (vpage 71) is "Manual
EQ".
:Moves the cursor
:Confirm the setting
(Up/Down/Left/Right)
Setting contents
<DSX> [SPEAKER]
and
Select the speakers you want to adjust when "L/R" or "Each" is
selected.
:Return to previous menu
. The " "
See overleaf