Denon AVR-4310 Owner's Manual page 46

ENGLISH
Making Detailed Settings (Manual Setup)
Making Other Settings (Option Setup)
OPTION
Setting items
Volume Control Volume Display : Set how volume is displayed.
Set the MAIN ZONE volume • Relative : Display ---dB (Min), in the range –80 dB ~ 18 dB.
setting. • Absolute : Display in the range 0 (Min) ~ 99.
• The "Volume Display" setting is applied also to the "Volume Limit" and
"Power On Level" display method.
• The "Volume Display" setting applies to all zones.
Volume Limit : Make a setting for maximum volume
• OFF : Do not set a maximum volume.
• –20dB (61) / –10dB (71) / 0dB (81)
Power On Level : Define the volume setting that is active when the
power is turned on.
• Last : Use the memorized setting from the last session.
• – – – (0) : Always use the muting on condition when power is turned on.
• –80dB ~ 18dB (1 ~ 99) : The volume is adjusted to the set level.
Mute Level : Set the amount of attenuation when muting is on.
• Full : The sound is muted entirely.
• –40dB : The sound is attenuated by 40 dB down.
• –20dB : The sound is attenuated by 20 dB down.
Source Delete PHONO / CD / DVD / HDP / TV / SAT/CBL / VCR / DVR / V.AUX / NET/
Remove input sources USB / TUNER : Select input source that is not used.
that are not used from the • ON : Use this source.
display. • Delete : Do not use this source.
NOTE
• Input sources being used in the various zones cannot be deleted.
• Input sources set to "Delete" cannot be selected using
SELECT

Main remote control
operation buttons
Default settings are underlined.
Setting contents
.
:Displaying the menu
Cancel the menu
Setting items
GUI Screensaver : Make screensaver settings.
Make GUI related settings. •
•
Wall Paper : Set wallpaper to display the background when playback is
stopped, etc.
•
•
•
•
Format : Set the video signal format to be output for the TV you are
using.
•
•
When a format other than the video format of the connected TV is set, the
picture will not be displayed properly.
Text : Display the content of operation during switching of surround mode,
input mode, etc.
SOURCE
•
•
Master Volume : Master volume display during adjustment.
•
•
•
NET/USB : Set the NET/USB screen display time when the input source
is "NET/USB".
•
•
•
•
:Moves the cursor
:Confirm the setting
(Up/Down/Left/Right)
Setting contents
ON : The screen saver is activated during GUI menu display or NET/USB
/ iPod / TUNER screen display if no operation is performed approximately
for a continuous 3-minute period. When you press
saver is cancelled and the screen before that screen saver started is
displayed.
OFF : Screen saver is not activated.
Picture : Set the background to a picture (DENON logo).
Black : Set the background to black.
Gray : Set the background to gray.
Blue : Set the background to blue.
NTSC : Select NTSC output.
PAL : Select PAL output.
The "Format" can also be set by the following procedure. However,
the GUI screen is not displayed.
<DSX> <RETURN>
1. Press and hold the and
"Video Format" appears on the display.
2. Press o p and set the video signal format.
<ENTER> <MENU> <RETURN>
3. Press the , or
setting.
NOTE
ON : Turn display on.
OFF : Turn display off.
Bottom : Display at the bottom.
Top : Display at the top.
OFF : Turn display off.
When the master volume display is hard to see when superimposed
on movie subtitles, set to "Top".
Always : Show display continuously.
30s : Show display for 30 seconds after operation.
10s : Show display for 10 seconds after operation.
OFF : Turn display off.
:Return to previous menu
uio p , the screen
for at least 3 seconds.
to complete the
See overleaf