Denon AVR-4310 Owner's Manual page 24

ENGLISH
Connecting Devices
USB Port
When you connect an iPod or USB memory device to the USB port, you can enjoy music, etc., stored on the iPod or USB memory device.
Front panel
n
USB memory
device
or
Set as Necessary
Set when you change the USB port for use.
"USB Select" (vpage 50)
• In the initial status, USB memory devices can be used by connecting
them to the USB port on the front panel.
• To connect an iPod to the AVR-4310, use the USB cable supplied
with the iPod.
• When you want to playback a movie file stored on the iPod, use the
DENON control dock for iPod (ASD-11R or ASD-1R, sold separately)
(vpage 16 "Control Dock for iPod").
• For iPods, playback is possible on iPod touch, classic and nano sold
from generation 5 on. For details, check the Web or page 54.
0
Rear panel
n
iPod
USB memory
device
NOTE
• You cannot use the USB port on the front panel and rear panel
simultaneously. Select and connect the USB port you are to use.
• Do not use an extension cable when connecting a USB memory
device. This may cause radio interference with other devices.
Component with Multi-channel Output connectors
The video signal can be connected in the same way as a Blu-ray Disc
player / DVD player (vpage 15 "Blu-ray Disc Player / DVD Player").
Blu-ray Disc player / DVD player /
External decoder
iPod
or
Set as Necessary
To play analog signals input from the external input (EXT. IN)
terminal, set "Input Mode" (vpage 49) to "EXT. IN".
"EXT. IN" can also be selected with
unit.
When a device is connected to the SBL/SBR terminal of the external input
terminals (EXT. IN), set "Amp Assign" (vpage 33) to "Normal".
L R L R L R
L R L R L R
INPUT MODE
on the main