Display - Denon AVR-4310 Owner's Manual

Display

q w
q
Input signal indicators
w
Input signal channel indicators
These light when digital signals are input.
When playing HD Audio sources, the"
indicator lights when an extension channel (a
channel other than the front, center, surround,
surround back or LFE channel) is input. If there
are two or more extension channels, the "
and " " indicators light.
e
Information display
The input source name, surround mode, setting
values and other information are displayed here.
r
Output signal channel indicators
t
Surround speaker indicators
These light according to the settings of the
surround A and B speakers.
y
Monitor output indicators
These light according to the HDMI monitor output
setting. When set to "Auto (Dual)", the indicators
light according to the connection status.
u
QUICK SELECT indicators
i
Master volume indicator
o
MUTE indicator
This lights when the mute mode is selected.
Q9 Q6 Q4 Q3
W1 W0 Q8 Q7 Q5
e
Q0
PARTY indicators
These indicators light during party mode.
• ORGANIZER
This lights to indicate that party mode has
"
started as Organizer.
• ATTENDEE
This lights to indicate that party mode has
started as Attendee.
"
Q1
AUDYSSEY MULTEQ XT indicators
Lighting is as follows, depending on the setting
of "Dynamic EQ" (vpage 71) and "Dynamic
Volume" (vpage 72).
• : When "Dynamic EQ" and "Dynamic
Volume" are "ON".
• : When the "Dynamic EQ" setting is
"ON" and the "Dynamic Volume"
setting is "OFF".
• : When "Dynamic EQ" and "Dynamic
Volume" are "OFF".
Q2
SLEEP indicator
This lights when the sleep mode is selected.
Q3
RESTORER indicator
This lights when the RESTORER mode is
selected.
Q4
Multi zone indicators
These light when the power for the respective
zone is turned on.
Q2 Q1 Q0 o i u
r t y
Q5
AL24 indicator
This lights when AL24 Processing Plus (vpage
98) is activated.
Q6
Input mode indicators
Q7
D.LINK indicator
This lights when playing using DENON LINK
connections.
Q8
HDMI indicator
This lights when playing using HDMI connections.
Q9
Tuner reception mode indicators
These light according to the reception conditions
when the input source is set to "TUNER".
• STEREO
In the FM mode, these light when receiving analog
stereo broadcasts.
• TUNED
Lights when the broadcast is properly tuned in.
• AUTO
These light when in the auto tuning mode.
• RDS
These light when receiving RDS broadcasts.
W0
Recording output source indicator
This lights when the REC OUT mode is selected.
W1
Decoder indicators
These light when the respective decoders are
operating.
ENGLISH
Part Names and Functions