Playing The Same Network Audio On Different Devices Connected In A Network (Party Mode Function) - Denon AVR-4310 Owner's Manual

Playing the Same Network Audio
on Different Devices Connected in a
Network (Party Mode Function)
The same network audio (Internet Radio, Media Server or iPod
DIRECT) can be played on multiple DENON products equipped with
the Party Mode function and connected in a network.
The party mode consists of one organizer and up to four attendees.
When one unit starts the party mode as the organizer, up to four
devices on which the party mode function is activated automatically
participate in the party as attendees. "Party Mode Function" (vpage
40) must be set to "ON" ahead of time in order to use the party mode
function.
Starting the Party Mode as the Organizer
1
[PARTY]
Press to become the organizer.
"Enter Party Mode?" is displayed.
An error message is displayed when you are not connected to a
b
network.
2
Press to select "Yes", then press
o p
The " " indicator on the display lights. The input source
automatically switches to "NET/USB" and the attendees are
automatically selected.
3
Play the desired track.
To Cancel the Party Mode
n
1
While in the party mode, press [PARTY]
"Exit Party Mode?" is displayed on the GUI screen.
2
Press o p to select "Yes", then press
"Power off Attendees component?" is displayed.
3
Press to select "Yes" or "No", then press
o p
ENTER
.
Yes : The power of the attendees is turned off and the party
mode is canceled.
No : The party mode is canceled without turning off the
power of the attendees.
Participating in the Party Mode as an Attendee
• When the organizer starts the party mode, up to four attendees are
selected automatically. No operation is required.
• When a device becomes an attendee, "
display. The input source automatically switches to "NET/USB" and
the same network audio as on the organizer is played.
• If there are fewer than four attendees, a device can join the party
mode after it has started. To participate in the party mode, perform
the operation described below.
1
[PARTY]
Press .
"Enter Party Mode?" is displayed.
An error message is displayed when you are not connected to a
b
network.
2
Press to select "Yes", then press
o p
To Cancel the Party Mode
n
1
While in the party mode, press
ENTER .
"Exit Party Mode?" is displayed on the GUI screen.
2
Press to select "Yes", then press
o p
In this case, the other devices remain in the party mode.
"Napster" and "USB" are not available in the Party Mode.
There can only be one organizer in the network. To form a new party
mode, first cancel the current party mode.
.
ENTER
.
" appears on the
ENTER
.
[PARTY] .
ENTER .
ENGLISH
Convenient Functions