Menu Operation; Quick Select Function; Sleep Timer Function - Denon AVR-4310 Owner's Manual

Menu Operation

The settings related to tone adjustment and volume can be made.
1
In the zone mode for which you want to operate,
press [MENU] .
The ZONE2 or ZONE3 menu is displayed on the ZONE2
monitor.
MENU ZONE2
MENU ZONE2
INPUT :SAT/CBL
SIGNAL:ANALOG
>Channel
VOL. :-40dB
Vol.Disp
Vol.Lev.
>Bass 0dB
Vol.Limit
Treble 0dB
P.On Lev.
HPF OFF
Mute Lev.
Lch Lev. 0dB
Rch Lev. 0dB
2
Press to select the menu to be set or
uio p
operated.
3
Press [MENU] to enter the setting.
The on-screen display disappears.
For ZONE2, the "Zone Setup" can be made while watching the on-
screen display.
Also, when ZONE3 is operated, the on-screen display appears on the
ZONE2 monitor, so operation can be performed watching this on-
screen display.

Quick Select Function

It is also possible to save three settings for multi-zone.
1
Set the items below to the settings you want to save.
q Input Source (vpage 84)
w Volume Level (vpage 84)
2
In the zone mode for which you want to operate,
press and hold the desired
"Memory" appears on the on-screen display.
STEREO
The current settings will be memorized.
Relative
- VAR -
-10dB
LAST GQuick Select DefaultsH
FULL
Z2/Z3 Quick Select 1
Z2/Z3 Quick Select 2
Z2/Z3 Quick Select 3
Calling the Settings Out
[QUICK SELECT]
Press
call out are saved.
Naming Quick Select settings
n
See "Quick Select Name" (vpage 43).
This is convenient for playing sources while going to sleep.
1
2
[QUICK SELECT]
until
Input Source Volume
n
DVD –40dB
SAT/CBL –40dB
VCR –40dB
The sleep timer is also canceled when the AVR-4310 is set to the
standby mode or the ZONE2 or ZONE3 power is turned off.
at which the settings you want to

Sleep Timer Function

Press [MAIN] to display the mode for the zone to be
operated.
[SLEEP]
Press and display the time you want to set.
The time switches as shown below each time
pressed.
OFF 120 min
30 min 60 min
To cancel the sleep timer
[SLEEP]
Press to set "OFF".
ENGLISH
[SLEEP]
is
90 min