6-2 Manual Operation of the ATC
Basic Operation of the ATC
You can perform basic operation of the ATC using the handy panel. Note, however, that this operation cannot be performed
when the spindle cover is open, during a cutting operating, or while the machine is paused.
☞ P. 49, "Chapter 3 - Basic Operation"
Procedure
<ATC TOOL MENU>
>
TOOL1
RETURN
TOOL2
Mag. cover
TOOL3
Meas. length
TOOL4
Force release
[Return to main]
<ATC TOOL MENU>
TOOL1
RETURN
TOOL2
Mag. cover
>
TOOL3
Meas. length
TOOL4
Force release
[Return to main]
Close the spindle cover.
Press the [MENU] key several times
to display [ATC TOOL MENU].
Use the hand wheel to select the
item.
Chapter 6 Handy Panel
73