Table of Contents
Advertisement
Plastic screws
(M4 x 30 mm)
Orient the hole
in this direction.
Spacer
Secure the cable carrier in place.
Continue by proceeding with "2-4 Step 3: Attach the Spindle and Cylinder."
2-3 Step 2: Attach the Magazine Unit
No Rotary Axis Unit
Install the Z-origin sensor.
For Use in Combination with a Rotary
Axis Unit
Installation of the Z-origin sensor is
not required.
Cable carrier
Cap screws
(M4 x 8 mm)
Chapter 2 Installation
35
Advertisement
Table of Contents
