Clearing A Paper Misfeed; Locating A Paper Misfeed - Toshiba E-studio 2051c Troubleshooting Manual

Clearing a Paper Misfeed

 Locating a paper misfeed
The equipment stops copying when the original or copy paper is misfed. Paper misfeeds are notified on the touch panel as
follows:
The paper misfeed symbol helps you locate the paper misfeed.
1
13 12 11
1. Reversing Automatic Document Feeder (lower) ( P.15)
2. Reversing Automatic Document Feeder (upper) ( P.16)
3. Fuser unit ( P.23)
4. Automatic duplexing unit ( P.21)
5. Bypass tray ( P.21)
6. Drawer feeding portion ( P.17)
7. Large Capacity Feeder ( P.18) or Paper Feed Pedestal ( P.18)
8. Paper transport path ( P.22)
9. Drawers ( P.19,  P.19) or drawer of the Large Capacity Feeder ( P.20)
10. Job Separator, Offset Tray or Bridge Kit ( P.25,  P.26)
11. Hole Punch Unit ( P.26,  P.29)
12. Saddle stitch unit ( P.31)
13. Finisher ( P.26,  P.29)
The picture of the hardware device shown on the touch panel differs depending on the finisher options installed.
Paper misfeed symbols
2 3 4 5
10 9 8 7 6
1 TROUBLESHOOTING FOR THE HARDWARE
Error code
Error message
Guidance for
clearing paper misfeeds

Clearing a Paper Misfeed

13