Toshiba E-studio 2051c Troubleshooting Manual page 35

1.TROUBLESHOOTING FOR THE HARDWARE
Press [YES] when "Cancel print job?" appears.
4
The print job is canceled.
If you do not want to cancel the print job
To restart the job without canceling it, replace the paper in the drawer with that corresponding to the size set in the
equipment after the paper misfeed is cleared. Then if you press [NO] in step 4, the job can be restarted. In this
case, it is not necessary to follow step 5 and later.
Press the [USER FUNCTIONS] button on the control
5
panel.
Press the [USER] tab to enter the [USER] menu and press [DRAWER].
6
1 TROUBLESHOOTING FOR THE HARDWARE
Clearing a Paper Misfeed 33