1 TROUBLESHOOTING FOR THE HARDWARE
Clearing a Paper Misfeed
Locating a paper misfeed
The equipment stops copying when the original or copy paper is misfed. Paper misfeeds are notified on the
touch panel as follows:
The paper misfeed symbol helps you locate the paper misfeed.
1
2
13
1. Finisher (optional) ( P.21) or Hole Punch Unit (optional) ( P.21)
2. Inserter (optional) ( P.21)
3. Reversing Automatic Document Feeder (lower) ( P.16)
4. Reversing Automatic Document Feeder (upper) ( P.17)
5. Inside of the equipment (paper exit area) ( P.26)
6. Inside of the equipment (paper transport area) ( P.26)
7. Bypass tray ( P.19)
8. External Large Capacity Feeder (optional) ( P.20)
9. Inside of the equipment (paper feed area) ( P.26)
10.Inside of the equipment (duplexing unit area) ( P.26)
11. Drawers ( P.18)or tandem large capacity feeder ( P.19)
12.Inside of the equipment (reversing area) ( P.26)
13.Saddle stitch unit (optional) ( P.21)
The picture of the hardware device shown on the touch panel differs depending on the finisher options
installed.
14
Clearing a Paper Misfeed
Paper misfeed symbols
3
4
5
6
12
11
10
9
8
7
Error code
Error message
Guidance for
clearing paper misfeeds