Clearing A Paper Misfeed; Locating A Paper Misfeed - Toshiba e-studio 207l Troubleshooting Manual

1 TROUBLESHOOTING FOR THE HARDWARE

Clearing a Paper Misfeed

 Locating a paper misfeed
The equipment stops copying when the original or copy paper is misfed. Paper misfeeds are notified on the
touch panel as follows:
The paper misfeed symbol helps you locate the paper misfeed.
1
13 12 11
1. Reversing Automatic Document Feeder (optional) (lower) ( P.18)
2. Reversing Automatic Document Feeder (optional) (upper) ( P.19)
3. Fuser unit ( P.26)
4. Automatic duplexing unit ( P.24)
5. Bypass tray ( P.23)
6. Drawer feeding portion ( P.20)
7. Large Capacity Feeder ( P.21) or Paper Feed Pedestal (both optional) ( P.21)
8. Paper transport path ( P.25)
9. Drawers ( P.22) or drawer of the Large Capacity Feeder (optional) ( P.22)
10.Job Separator, Offset Tray or Bridge Kit (all optional) ( P.28,  P.29)
11. Hole Punch Unit (optional) ( P.29, P.33, P.41, P.44)
12.Saddle stitch unit (optional) ( P.37, P.46)
13.Finisher (optional) ( P.29,  P.33,  P.37,  P.41,  P.44,  P.46)
The picture of the hardware device shown on the touch panel differs depending on the finisher options
installed.
16

Clearing a Paper Misfeed

Paper misfeed symbols
2 3 4 5
10 9 8 7 6
Error code
Error message
Guidance for
clearing paper misfeeds