1 TROUBLESHOOTING FOR THE HARDWARE
Clearing a Paper Misfeed
Locating a paper misfeed
The equipment stops copying when the original or copy paper is misfed. Paper misfeeds are notified on the touch panel as
follows:
The paper misfeed symbol helps you locate the paper misfeed.
1
13
12
11
1. Reversing Automatic Document Feeder (optional) (lower) ( P.16)
2. Reversing Automatic Document Feeder (optional) (upper) ( P.17)
3. Fuser unit ( P.24)
4. Automatic duplexing unit ( P.22)
5. Bypass tray ( P.21)
6. Drawer feeding portion ( P.18)
7. Large Capacity Feeder ( P.19) or Paper Feed Pedestal (both optional) ( P.19)
8. Paper transport path ( P.23)
9. Drawers ( P.20) or drawer of the Large Capacity Feeder (optional) ( P.21)
10. Job Separator, Offset Tray or Bridge Kit (all optional) ( P.27, P.28)
11. Hole Punch Unit (optional) ( P.29, P.33, P.40, P.43)
12. Saddle stitch unit (optional) ( P.36, P.45)
13. Finisher (optional) ( P.29, P.33, P.36, P.40, P.43, P.45)
The picture of the hardware device shown on the touch panel differs depending on the finisher options installed.
14
Clearing a Paper Misfeed
Paper misfeed symbols
2
3
4
5
10
9
8
7
6
Error code
Error message
Guidance for
clearing paper misfeeds