Toshiba E-studio 2051c Troubleshooting Manual page 55

1.TROUBLESHOOTING FOR THE HARDWARE
Close the front cover of the finisher.
10
 Saddle Stitch Finisher
1 Open the front cover of the finisher.
2 Remove the staple cartridge.
3 Take the empty staple case out of the staple cartridge.
Pull up the empty staple case while pushing both sides as shown in the
figure.
4 Fit the new staple case into the staple cartridge.
Push the staple case hook into the staple cartridge socket until you
hear a click.
1 TROUBLESHOOTING FOR THE HARDWARE
Refilling With Staples 53