Paper Misfeed In The Saddle Stitch Finisher And The Hole Punch Unit - Toshiba E-studio 2051c Troubleshooting Manual

1.TROUBLESHOOTING FOR THE HARDWARE
Carefully return the finisher to its original position.
13
Do not put your hand or fingers on the top of the finisher when
closing it.
They could be caught and this could injure you.
Close the front cover of the finisher.
14
 Paper misfeed in the Saddle Stitch Finisher and the Hole Punch Unit
Remove the misfed paper from the receiving tray
1
section.
Open the front cover of the finisher.
2
Turn the green dial until the triangle mark falls within
3
the designated area of the label.
1 TROUBLESHOOTING FOR THE HARDWARE
Clearing a Paper Misfeed 29