Clearing A Paper Misfeed; Locating A Paper Misfeed - Toshiba e-studio556 Troubleshooting Manual

Clearing a Paper Misfeed

 Locating a paper misfeed
The equipment stops copying when the original or copy paper is misfed. Paper misfeeds are notified on the touch panel as
follows:
The paper misfeed symbol helps you locate the paper misfeed.
1 2
13
1. Finisher (optional) ( P.20) or Hole Punch Unit (optional) ( P.20)
2. Inserter (optional) ( P.20)
3. Reversing Automatic Document Feeder (lower) ( P.15)
4. Reversing Automatic Document Feeder (upper) ( P.16)
5. Inside of the equipment (paper exit area) ( P.25)
6. Inside of the equipment (paper transport area) ( P.25)
7. Bypass tray ( P.18)
8. External Large Capacity Feeder (optional) ( P.19)
9. Inside of the equipment (paper feed area) ( P.25)
10. Inside of the equipment (duplexing unit area) ( P.25)
11. Drawers ( P.17)or tandem large capacity feeder ( P.18)
12. Inside of the equipment (reversing area) ( P.25)
13. Saddle stitch unit (optional) ( P.20)
The picture of the hardware device shown on the touch panel differs depending on the finisher options installed.
Paper misfeed symbols
3 4 5 6
12 11 10 9 8
1 TROUBLESHOOTING FOR THE HARDWARE
7
Error code
Error message
Guidance for
clearing paper misfeeds

Clearing a Paper Misfeed

13