Toshiba E-studio 2051c Troubleshooting Manual page 110

7 CHECKING THE EQUIPMENT STATUS WITH TopAccess
Error Code
Syntax error in parameters or arguments
2501
Bad sequence of commands
2503
Command parameter not implemented
2504
Mailbox unavailable
2550
User not local
2551
Insufficient system storage
2552
Mailbox name not allowed
2553
108 Error Codes
Problem Description Corrective Action
Check whether the Terminal mail address and
Destination mail address are correct. Check whether
the mail server is operating properly. Turn the power
OFF and then back ON. Try the problem job again.
Check whether the mail server is operating properly.
Turn the power OFF and then back ON. Try the
problem job again. If the error still persists, contact your
service representative.
Check whether the mail server is operating properly.
Turn the power OFF and then back ON. Try the
problem job again. If the error still persists, contact your
service representative.
Confirm that the destination Email addresses are
correct. Check the access privilege for the mailbox in
the mail server.
Confirm that the destination Email addresses are
correct. Check whether the mail server is operating
properly.
The file is too large for the mailbox. Confirm the mailbox
size on the mail server. Transmit again in text mode or
with a lower resolution. If the error still persists, divide
the document and transmit again.
Check if there is an unpermitted character in the
mailbox name in the mail server.