Error Messages And Their Meanings - Savin 4000 Operating Instructions Manual

Error Messages and Their Meanings

If there is an error, one of the following messages may appear on the display. It
might just flash up briefly, so if you are watching for errors, stay by the machine
and check the display.
Message
Clear Misfeed(s)
Remove originals from the Document Feeder.
Reset originals and press Start.
Error. Transmission has been cancelled.
Cannot detect original size. Reset original(s)
and press Start key.
<FAX>
Personal Code Access. Please enter your Per-
sonal Code.
LService call
Functional problem with the fax. Please con-
tact your service representative.
Memory is full. Cannot store additional origi-
nals. (Stored original(s) will be transmitted.)
Error Messages and Their Meanings
Problem and Solution
Original misfeed
Remove originals from Document Feeder.
Set any pages of the original that were not
scanned and send again.
Original jammed during Memory Transmis-
sion. Reset originals that have not been
scanned.
A document jam occurred during Immediate
Transmission. Press [OK] and resend the page
which has been not sent.
An error occurred during Immediate Trans-
mission. Press [OK] and re-send the original.
Note
❒ There may be a problem with the machine
or the telephone line (for example noise or
cross talk). If the error re-occurs frequently,
contact your service representative.
The machine failed to detect the size of the
original. Press the < or > key to select the
size and press the {Start} key three times.
Personal Codes Access is switched on. You
need to enter a previously programmed 4 digit
ID code.
See Chapter6, "Personal Codes" in the Ad-
vanced Features manual.
There is a problem with the fax function. Con-
tact your service representative and tell the
code number shown in the display. The copier
function will still work normally.
If you press [OK], the machine returns to the
standby mode and start transmitting pages
which has been scanned.
4
71