Deleting Quick Dials - Savin 4000 Operating Instructions Manual

Registering

Deleting Quick Dials

This procedure describes how to find
a programmed Quick Dial and delete
it.
Limitation
❒ When a Quick Dial key is being
used for a standby Memory Trans-
mission, the message "This desti-
3 n a t i o n i s i n u s e f o r s t a n d b y
transmission file. Please modify/
delet e after transm ission." is
shown and you cannot delete the
destination for this key.
A
Make sure that the machine is in
Facsimile mode and the standby
display is shown.
Us28-1.tif
Note
❒ If the standby display is not
shown, press the {Facsimile}
key.
B
Press the { { { { User Tools} } } } key.
LTWO120E.eps
Screen Contrast
User Tools Adjustment
C
Enter the function number for
" R e g i s t e r / D e l e t e " w i t h t h e
number keys.
Us137-2.tif
50
Interrupt
Program Clear Modes Energy Saver
D
Enter the number for "Delete
Quick Dial" with the number
keys.
Us137-3.tif
Note
❒ If "Delete Quick Dial" is not
shown, press [↑ ↑ ↑ ↑ Prev.] or [↓ ↓ ↓ ↓ Next].
E
Press the Quick Dial key which
you want to delete.
The current contents of the key are
displayed.
Us140-2.tif
Note
❒ If you press the wrong key,
press [No] then try again.
❒ You can press [Status] to see the
status currently programmed.
Usfax-new043.tif
F
Press [Yes].
Us140-4.tif
Note
❒ If you press [No], the destination
is not deleted and the display is
shown in step E appears again.